ENVIRONMENTAL SCIENCE U.S., LLC · beta-Cyfluthrin 10.5%; Imidacloprid 21% · EPA Reg 101563-134 · INSECTICIDE
Document last checked 2013-02-26
According to the label From the product label
These details were extracted from this product's label PDF.
The label is the law.
Confirm every rate, site, restriction and safety requirement against the label before mixing or applying.
Check for a
state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below.
·
EPA registration data for Reg. 101563-134 →
Temprid SC Insecticide is a suspension concentrate formulation designed for professional and commercial pest control. It features two active ingredients: imidacloprid (21.0%) and β-cyfluthrin (10.5%), providing both contact and systemic action for quick knockdown and long-lasting residual control. This product is used to control a wide range of indoor and outdoor pests, including ants, cockroaches, spiders, fleas, ticks, wasps, and wood-infesting insects. It can be applied as a spot spray, crack and crevice treatment, or via mist/foam applications. For indoor use, it is effective in buildings, structures, and modes of transport. For outdoor use, it can be applied to building perimeters, foundations, and landscape ornamentals. When applying to landscapes, use caution to avoid direct contact with water or runoff into aquatic environments. Technicians should use low-pressure spray equipment (not exceeding 50 psi) and wear appropriate PPE, including safety glasses, goggles, a face shield, and a dust/mist respirator when treating overhead areas. Always avoid contact with treated surfaces until they are completely dry.
Pests covered (55)
Ants, Cockroaches, Spiders, Fleas, Ticks, Wasps, Yellow Jackets, etc.Wood-infesting insects (Termites, Carpenter ants, etc.)SCORPIONSFIRE ANTSTINK BUGSFLEASPILLBUGSSOWBUGSCENTIPEDESMILLIPEDESSPIDERSTICKSDERMESTID BEETLESCARPET BEETLEELM LEAF BEETLEDARKLING BEETLESFLIESGNATSGREENBOTTLE FLYCLUSTER FLYMIDGESMOSQUITOESHOUSE FLYFUNGUS GNATSPHORID FLIESSCIARID FLIESFRUIT FLIESSPRINGTAILSEARWIGSDRYWOOD TERMITESWASPSANTSCARPENTER ANTSHORNETSYELLOWJACKETSCARPENTER BEEMOTHSHIDE BEETLELYCTID BEETLESWHARFBORERBARK BEETLESBED BUGBOXELDER BUGASIAN LADY BEETLESCLOTHES MOTHSFIREBRATSILVERFISHAMBROSIA BEETLESPOWDERPOST BEETLESANOBIID BEETLESDEATHWATCH BEETLEOLD HOUSE BORERCOCKROACHESCRICKETSCLOVER MITE
Areas treatable (19)
Buildings, structures, and modes of transport (spot spray, crack/crevice, or foam)Perimeters, foundations, eaves, attics, and landscape ornamentalsWood surfaces, galleries, and structural voidsORNAMENTAL PLANTS (PLANT BED)BUILDINGS AND STRUCTURES (NONAGRICULTURAL-OUTDOOR) (FOLIAR TREATMENT)HOSPITALS (RESIDUAL CRACK AND CREVICE TREATMENT)WAREHOUSES (INDOOR INEDIBLE)WAREHOUSES (OUTDOOR INEDIBLE)FOOD PROCESSING AREAS (RESIDUAL CRACK AND CREVICE TREATMENT)PATIOSPORCHESDOMESTIC DWELLINGS (PERIMETER SOIL TREATMENT)STORES (OUTDOOR INEDIBLE)FACTORIES (OUTDOOR INEDIBLE)SCHOOLS (RESIDUAL CRACK AND CREVICE TREATMENT)FACTORIES (INDOOR INEDIBLE)STORES (INDOOR INEDIBLE)MATTRESSESTRANSPORTATION VEHICLES (NONFEED/NONFOOD) (RESIDUAL GENERAL TREATMENT)
Application instructions from the label 3
Buildings, structures, and modes of transport (spot spray, crack/crevice, or foam)
severe infestations
Use high rate for severe infestations.
- Target pest
- Ants, Cockroaches, Spiders, Fleas, Ticks, Wasps, Yellow Jackets, etc.
- Location
- Indoor
Perimeters, foundations, eaves, attics, and landscape ornamentals
Avoid direct application to water or areas where surface water is present.
- Target pest
- Ants, Cockroaches, Spiders, Fleas, Ticks, Wasps, Yellow Jackets, etc.
- Location
- Outdoor
Wood surfaces, galleries, and structural voids
May use foam or drill holes to treat galleries.
- Target pest
- Wood-infesting insects (Termites, Carpenter ants, etc.)
- Location
- Both
Mixing instructions 2
| For pests |
Amount |
Per |
Finished strength |
Label notes |
| General Indoor/Outdoor Pests |
0.27 fl oz |
1 gal water |
0.075% |
Shake or agitate mixture before use. |
| Severe infestations/Fire ants/Hornets/Wasps |
0.54 fl oz |
1 gal water |
0.15% |
Use higher rate for these specific pests. |
Worker safety
Re-entry interval (REI)
Avoid contact with treated surfaces until dry.
PPE required
When treating overhead areas, wear safety glasses, goggles, a face shield, and a dust/mist respirator.
Timing & weather
- Re-apply every 7 to 10 days if needed.
Use restrictions 8
- Do not apply in food/feed areas or food handling establishments.
- Do not apply to broadcast treatments to floors or floor coverings.
- Do not apply in hospitals or nursing homes while occupied.
- Do not apply in classrooms while occupied.
- Do not apply as a space spray.
- Do not allow excessive dripping or run-off.
- Do not apply to furniture or upholstery where prolonged contact with humans will occur.
- Do not use in pastures or areas of food crop production.