Chemicalsmgkonslaught-powershot-wasp-hornet-aerosol

Onslaught® Powershot Wasp & Hornet Aerosol

MGK · MGK 264 0.08%; Piperonyl butoxide 0.05%; Pyrethrins 0.025%; Esfenvalerate 0.05% · EPA Reg 1021-1852 · INSECTICIDE Document last checked 2024-05-21

About this product

Active ingredient MGK 264 0.08%; Piperonyl butoxide 0.05%; Pyrethrins 0.025%; Esfenvalerate 0.05%
Manufacturer MGK
Category INSECTICIDE

Full details for Onslaught® Powershot Wasp & Hornet Aerosol

Source product label ↗ Open the catalog source label while the local copy is reviewed. Verify the product name, EPA registration number, and revision before use. Source safety data sheet ↗ Open the catalog source SDS while the local copy is reviewed. Verify the exact product and revision before relying on it. EPA registration data Reg. 1021-1852 — registry reference, signal word and status.

Applicator discussion

Nothing here is label direction — the label is the law. These are notes from other applicators, moderated before they appear. Check the labeling accompanying the product and applicable state requirements.

Add your experience

Sign in through the portal or Create a free account to post. Comments are reviewed before they appear. Need a website for your pest-control business? See site plans.

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. · EPA registration data for Reg. 1021-1852 →

This aerosol product is designed to control wasps, yellowjackets, mud daubers, hornets, spiders (including black widows), scorpions, crickets, ants (excluding carpenter, fire, and harvester ants), centipedes, and earwigs. For nests, spray the area until soaked at sunrise or sunset while standing a safe distance away. It can also be used for spot treatments on outdoor building surfaces and perimeters, such as the sides of buildings, eaves, soffits, doors, windows, and potential entry points. For individual insects, apply in 1 to 2 second bursts directly on the target.

Pests covered (18)
Wasps, Yellowjackets, Mud Daubers and HornetsSpiders (including Black Widows), Scorpions, Crickets, Ants (excluding carpenter ants, fire ants and harvester ants), Centipedes and EarwigsinsectsCENTIPEDESSCORPIONSSPIDERSBLACK WIDOW SPIDERTICKSEARWIGSWASPSANTSCARPENTER ANTSMUD DAUBERSHORNETSYELLOWJACKETSBITING INSECTSCRICKETSCRAWLING INSECTS
Areas treatable (3)
nestsbuilding surfaces and perimeters (spot treatments) on structures onlyDOMESTIC DWELLINGS (OUTDOOR)

How to treat each type of area 3

nests

Spray at sunrise or sunset [dusk] when insects are least active. Stand a safe distance from the nest. Do not stand directly underneath or above nest. Shake can well before each use. Always hold can upright while spraying. With wind at your back, aim nozzle at nest and spray until soaked. Wait 24 hours before removing the nest.

Target pest
Wasps, Yellowjackets, Mud Daubers and Hornets
Location
Outdoor
Target pest Rate Unit Label notes
Spiders (including Black Widows), Scorpions, Crickets, Ants (excluding carpenter ants, fire ants and harvester ants), Centipedes and Earwigs 1 to 2 second bursts seconds Spray 1 to 2 second bursts directly on insects. For scorpions, stand 3 to 4 feet away and thoroughly cover the insect. Make sure scorpions are dead before removing.

building surfaces and perimeters (spot treatments) on structures only

Limited outdoor residential application to building surfaces and perimeters (spot treatments) on structures only. (1) Applications to the side of a building, up to a maximum of 3 feet above grade; (2) Applications to underside of eaves, soffits, doors, or windows permanently protected from rainfall by a covering, overhang, awning, or other structure; and (3) Applications around potential pest entry points into buildings, when limited to a surface band not to exceed one inch in width.

Target pest
insects
Location
Outdoor

Worker safety

PPE required Avoid contact with skin, eyes, or clothing. Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse.

Timing & weather

Use restrictions 9